Securifor Anti-Climb Rigid Mesh
Product Overview
Securifor 358 Anti-climb rigid mesh is a high-security and very strong rigid weldmesh used extensively in Europe, Australia and South Africa. Ideal for high-security perimeter security applications such as Prisons, Military facilities and Power Installations, Securifor offers excellent strength, visibility, erection simplicity and is highly problematic to climb. Due to its rigidity and minimal wind resistance it is extremely stable making it ideal for use with electronic alarms and detection systems.
Coupled with Argus™ anti-tamper fixtures which are used to secure the mesh sheets to flanged beam, hollow section steel or timber posts, Securifor fence panels are tough, attractive and cost effective and most importantly - almost impenetrable.
Key Features
Vandal resistant
Securifor's finger-resistant apertures combined with 4mm wire diameter provides a substantial barrier that is difficult to climb and penetrate. Almost impossible to cut wires by use of conventional bolt or wirecutters.
Stability
Due to its rigidity and minimal wind resistance, Securifor is very stable, making it ideal for use with electronic alarms and when strain tension on end anchors cannot be achieved such as roof tops and walkway protection.
Good viewing visibility
In spite of the small mesh aperture the see-through characteristics remain unimpaired when viewed head-on and even at an angle to the fence. This is particularly important for clear camera surveillance.
Durable & Low Maintenance
Securifor's Bezinal aluminised zinc coating offers low maintenance, long life protection. Hampden Fence offers a 10 Year Warranty on Securifor Anti-Climb Rigid Mesh.
Applications
- Correctional Facilities: Prisons, Youth Justice Centres
- Animal Enclosures: Zoos, Dog Pounds
- Utility Protection: Power Sub Stations, Water Treatment Plants
- Architectural Screens: Staircase Enclosures, Pedestrian Bridge Screens
- Educational Facilities: Schools, University Campuses
- Outdoor Centres: Garden Centres, Building Yards
- Retail: Shopping Centres, Malls
Specifications
Mesh Material
- Securifor 358 Mesh: Electrically welded at every intersection
- Horizontal aperture: 72.2mm
- Vertical aperture: 8.7mm
Panels
- Max Sheet Width: 2366 mm, Oriented with Attack Face Narrow 72mm aperture on horizontal plane
- Height: <5000 mm
- Dimension tolerance: +/- 2.5mm
- Squareness: + 0.2% of nominal panel size.
- Flatness: +/- 50mm clear of surface laid flat.
- Solidity: 35%
- Weight: 9.4 kg/m²
Wire
- Type: 4mm diameter Bright Drawn Inter Annealed.
- High Tensile strength: 540-615 N/mm²
- Fatigue resistance: 13 No. 90° bends (before welding), 8 No. 90° bends (after welding)
- Weldshear strength: 75% of tensile strength wire to EN10223-4 : 1998
Wire Coating
- Bezinal coated with zinc/aluminium alloy (95%-5% aluminium).
- Minimum coating: 240 g/m²
Warranty*
- Securifor® 358 Mesh 10 years manufacturer's warranty (*Some conditions apply)
Post Form
- Cut to specified length to include footing depth.
- Drilled to 7.5mm one side to accept mesh/clamp plate fixing bolts at 300mm centres.
- Capped with galvanised pre-formed steel weather caps.
- Hot dip galvanised after fabrication.
Post Material
- Square Hollow Section (SHS): 100x100x5mm x 14.2kgs/mt or 100UC
- Grade: C350LO
- P of I: About both axis : 2.66 (106mm4)
- Minimum tensile strength: 350-430 MPa
- Hot Dip Galvanised after fabrication
Clamp Plate
- MS Flat 50x5mm to AS3679/250
- Cut to suit above ground section of post and slotted at 300mm centres with 25x10mm slot
- Hot dip galvanised after fabrication
Fittings
- M8 Coach head hot dip galvanised.
- Alternative M8 Power Drives, one way or reversible.
- M8 Security Shear Dome. Thread tapped after hot dip galvanising to BS729
Mid Bay Supports
- Square Edge Flat: 300x40x8mm MS to AS3679/250 (for in ground).
- Angle: 75x50x6mm MS to AS3679/250 (for surface mount).
